FAR-F6KB-1G8625-B4GT [TAIYO YUDEN]
SAW Filter,;
| 型号： | FAR-F6KB-1G8625-B4GT |
| 厂家： | 
TAIYO YUDEN (U.S.A.), INC |
| 描述： | SAW Filter, LTE |
| 文件： | 总10页 (文件大小：238K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Notice for TAIYO YUDEN productsꢀ
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■ Product information in this catalog is as of October 2011. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be-
fore practical application or usage of the Products.
Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorpo-
rating such products, which are caused under the conditions other than those specified in this catalog or individual
specification.
■ Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is
available.
■ Please conduct validation and verification of products in actual condition of mounting and operating environment
before commercial shipment of the equipment.
■ All electronic components or functional modules listed in this catalog are developed, designed and intended for
use in general electronics equipment.(for AV, office automation, household, office supply, information service,
telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any
equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have
direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, subma-
rine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic equipment,
if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliabil-
ity evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to
install a protective circuit is strongly recommended at customer's design stage.
■ The contents of this catalog are applicable to the products which are purchased from our sales offices or distribu-
tors (so called“TAIYO YUDEN’s official sales channel”).
It is only applicable to the products purchased from any of TAIYO YUDEN’s official sales channel.
■ Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may oc-
cur in connection with a third party's intellectual property rights and other related rights arising from your usage of
products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights.
■ Caution for export
Certain items in this catalog may require specific procedures for export according to“Foreign Exchange and For-
eign Trade Control Law”of Japan,“U.S. Export Administration Regulations”, and other applicable regulations.
Should you have any question or inquiry on this matter, please contact our sales staff.
notice_e-01
SAW/FBAR DEVICES (FILTER / DUPLEXERS)
REFLOW
■ FEATURES
■ APPLICATIONS
◦ꢀLow Insertion Loss
◦Uꢀ MTS（W-CDMA）
◦Gꢀ SM
◦ꢀHigh Attenuation
◦ꢀSmall Size Package
◦Cꢀ DMA
◦Lꢀ TE
◦ꢀHigh Reliability with Hermetic Sealing（MSL1）
◦ꢀEnvironmentally Conscions
◦Gꢀ PS
◦Oꢀ ther
■ ORDERING CODE
（A）Previous Rule (applied to products registered on March 31, 2010 or before.)
F A R － D 6 N F － 1 G 9 6 0 0 － P 1 B Z － Z
❶
❷
❸
❹
❺
❻
❼
❽
❾
❿
⓫
⓬
❶Family
❷Common sign
❹Package type
❼Frequency
❽Common sign
❿Serial Number
－
Fixation
－
Fixation
❺Product type
❻Common sign
Fixation
❸Series
❾Design
⓫Custom, Status
⓬Packing
－
Product
Frequency Range
700-1000MHz
1000-5000MHz
700-1000MHz
700-1000MHz
1000-5000MHz
700-1000MHz
1000-5000MHz
D5
D6
Duplexer
Duplexer
J5 Dual Duplexer
F5
F6
Filter
Filter
G5
G6
Dual Filter
Dual Filter
（B）New Rule (applied to products registered on April 1, 2010 or later.)
D 6 N F 1 G 9 6 0 P 1 B Z － Z _ S
❶
❷
❸
❹
❺
❻
❼
❽
❾
❿
❶Series
❷Package type
❹Frequency
❺Design
❻Serial Number
❽Packing
Product
Duplexer
Duplexer
Frequency Range
700-1000MHz
1000-5000MHz
700-1000MHz
700-1000MHz
1000-5000MHz
700-1000MHz
1000-5000MHz
D5
D6
❸Product type
❼Custom
❾Custom, Status
J5 Dual Duplexer
F5
F6
Filter
Filter
❿Status, JIG
Nothing
MP
G5
G6
Dual Filter
Dual Filter
S
ES
＊For further details, please contact to TAIYO YUDEN Co.,Ltd.
■ EXTERNAL DIMENSIONS/STANDARD QUANTITY
2.5×2.0×0.6（8pin）
2.5×2.0×0.6（9pin）
2.5×2.0×0.65
2.0×1.6×0.5
0.6max
0.6max
0.65max
0.5max
2.5±0.1
2.5±0.1
2.5±0.1
2.0±0.1
2.0±0.1
2.0±0.1
2.0±0.1
1.6±0.1
index
index
index
index
4-0.9625
4-0.9625 2-0.3
4-0.9625 2-0.3
4-0.775 2-0.325
0.9×0.375
C0.15
0.9×0.375
0.60×0.30
C0.15
4-0.7375
8-0.375
4-0.7375
8-0.375
4-0.7375
8-0.375
4-0.575
8-0.30
C0.15
C0.15
Unit：mm
Unit：mm
Unit：mm
Unit：mm
8-0.425
8-0.425
8-0.425
8-0.30
＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
sawfilter01_e-01
184
1.4×1.0×0.5
1.1×0.9×0.5
1.8×1.4×0.5
1.5×1.1×0.5
0.5max
0.5max
1.80±0.1
1.50±0.1
1.40±0.1
1.10±0.1
0.5max
0.5max
1.40±0.1
1.10±0.1
1.00±0.1
0.90±0.1
index
index
index
index
1.41
0.47
1.17
0.39
0.50 0.50
0.25
0.40 0.40
0.20
0.60
0.25
0.60
0.39
0.18
0.49
1.00
0.78
0.325
0.25
0.25
0.21
0.25
0.18
0.325
0.25
0.25
0.2
0.24
0.18
0.21
0.23
Unit：mm
Unit：mm
Unit：mm
Unit：mm
●2G Frequency Allocation
GSM
GSM Band
850
3GPP Band
Name
Region
US
Use
T（x MHz）
824-849
R（x MHz）
869-894
V
GSM850
EGSM
GPRS, EDGE
GPRS, EDGE
GPRS, EDGE
GPRS, EDGE
900
VIII
III
II
CN/EU
CN/EU
US
880-915
925-960
1800
DCS
1710-1785
1850-1910
1805-1880
1930-1990
1900
GSM1900
●3G Frequency Allocation
3GPP/FDD（W-CDMA/LTE）
3GPP Band
3GPP2 Band Class
Name（Block）
2G
Region
Use（Status）
W-CDMA
W-CDMA
LTE
T（x MHz）
1920-1980
1850-1910
1710-1785
1710-1755
824-849
R（x MHz）
2110-2170
1930-1990
1805-1880
2110-2155
869-894
I
6
EU, JP, CN
US
II
1（, 14）
8
1.9G
1800
－
850
800
2.5G
900
1.7G
－
III
EU
IV
15
0
US
W-CDMA
W-CDMA
W-CDMA
LTE
V
US
VI
－
13
9
JP
830-840
875-885
VII
VIII
IX
EU
2500-2570
880-915
2620-2690
925-960
EU
W-CDMA
W-CDMA
W-CDMA
W-CDMA/LTE
LTE
－
－
－
－
－
－
－
－
－
0-3
－
－
－
JP
1750-1785
1710-1770
1845-1880
2110-2170
X
US
XI
1.5G
JP
1427.9-1452.9（1427.9-1447.9）
698-716
1475.9-1500.9（1475.9-1495.9）
728-746
XII
XIII
XIV
XV
XVI
XVII
XVIII
XIX
XX
XXI
Lower 700（A,B,C） US
Upper 700（C）
Upper 700（D）
－
US
US
－
LTE
777-787
746-756
LTE
788-798
758-768
－
－
LTE
1900-1920
2010-2025
704-716
2600-2620
2585-2600
734-746
－
－
Lower 700（B,C）
New 800
US
JP
JP
EU
JP
CDMA2000 or LTE
W-CDMA or LTE
LTE
815-830
860-875
Extended 800
830-845
875-890
－
832-862
791-821
Extended 1.5G
LTE
1447.9-1462.9
1495.9-1510.9
3GPP/TDD
3GPP Band
3GPP2 Band Class
Name
－
－
－
－
－
－
－
－
Region
－
－
－
－
－
－
－
－
Use（Status）
T（x MHz）
1900-1920
2010-2025
1850-1910
1930-1990
1910-1930
2570-2620
1880-1920
2300-2400
R（x MHz）
1900-1920
2010-2025
1850-1910
1930-1990
1910-1930
2570-2620
1880-1920
2300-2400
33
34
35
36
37
38
39
40
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
sawfilter01_e-01
185
●3G Frequency Allocation
3GPP2（CDMA2000）
3GPP2 Band Class
3GPP Band
Name
Region
Use
T（x MHz）
824-849
R（x MHz）
869-894
0
V
（V）
－
II
CDMA
US, CN, KR CDMA2000
0-2
0-3
1
J-CDMA（6MHz） JP
J-CDMA（Plan）
PCS
CDMA2000
CDMA2000 or LTE
CDMA2000
－
CDMA2000
CDMA2000
CDMA2000
CDMA2000
－
824-830
869-875
JP
US
－
815-824
860-869
1850-1910
872-909, 880-915
887-925
1930-1990
917-954, 925-960
832-870
2
－
－
－
－
I
－
3
J-CDMA（27MHz） JP
K-PCS
4
KR
EU
JP
－
1750-1780
452-484
1840-1870
462-494
5
CDMA450
6
J-CDMA（IMT）
－
1920-1980
776-794
2110-2170
746-764
7
8
III
VIII
－
－
－
－
－
－
－
US
－
－
1710-1785
880-915
1805-1880
925-960
9
10
11
12
13
14
15
Secondary
CDMA2000
817-824
862-869
－
－
－
－
－
－
US
－
－
－
452-484
462-494
870-876
915-921
VII
2500-2570
1850-1915
1710-1755
2620-2690
1930-1995
2110-2155
（II）
IV
PCS（G-Band）
AWS
CDMA2000
US
CDMA2000
TD-SCDMA, PHS
3GPP Band
3GPP2 Band Class
Name
2G
Region
CN
Use
T（x MHz）
2010-2025
1880-1920
2545-2575
R（x MHz）
2010-2025
1880-1920
2545-2575
－
－
－
－
－
－
TD-SCDMA
TD-SCDMA
PHS
1.9G
CN
CORE XGP
JP
●OTHERS
Wireless LAN, Bluetooth, GPS
System
Name（Block）
Frequenc（y MHz）
Wireless LAN
Wireless LAN
Bluetooth
GPS
IEEE 802.11
IEEE 802.11a
IEEE 802.15.1
－
2400-2483.5
5150-5350
2400-2483.5
1574.42-1576.42
■ PART NUMBERS
●Duplexers
Package Size
（mm）
Insertion Loss
System
Part number
Isolation（dB）
Remarks
（dB）
1.4/1.7
1.4/1.7
1.5/1.6
1.45/1.8
1.5/1.8
1.6/1.8
1.6/1.7
1.4/1.7
1.4/1.7
1.5/1.8
1.8/2.3
1.9/2.3
1.9/2.3
1.7/2.0
1.7/2.2
2.2/3.1
2.3/2.7
2.0/2.3
2.5/2.8
2.5/3.4
2.3/2.5
2.6/2.5
1.5/1.7
1.6/1.9
1.9/1.8
2.2/2.2
2.1/2.7
1.7/2.0
1.6/1.7
1.9/2.5
FAR-D6JG-2G1400-D3FZ
FAR-D6JH-2G1400-B1BT
D6PE2G140P3AW
2.5×2.0×0.65
2.5×2.0×0.65
2.0×1.6×0.5
2.5×2.0×0.6
2.0×1.6×0.5
2.5×2.0×0.6
2.5×2.0×0.6
2.0×1.6×0.5
2.0×1.6×0.5
2.0×1.6×0.5
2.5×2.0×0.65
2.5×2.0×0.65
2.5×2.0×0.65
2.5×2.0×0.6
2.0×1.6×0.5
2.5×2.0×0.65
2.5×2.0×0.65
2.5×2.0×0.65
2.5×2.0×0.65
2.5×2.0×0.65
2.5×2.0×0.65
2.5×2.0×0.65
2.5×2.0×0.65
2.5×2.0×0.65
2.0×1.6×0.5
2.5×2.0×0.6
2.5×2.0×0.6
2.5×2.0×0.6
2.5×2.0×0.6
2.5×2.0×0.65
54/47
58/48
59/47
66/52
58/51
57/51
60/53
59/52
59/52
61/44
58/50
58/50
59/54
60/53
58/54
55/50
55/53
58/52
54/55
56/53
56/53
59/59
57/51
53/52
55/47
60/55
62/57
61/58
62/56
58/50
9 Pin, B Type
W-CDMA I（2G）
9 Pin, B Type Rx : Bal.100ohm STD
9 Pin, B Type Rx : Bal.100ohm
9 Pin, B Type New
FAR-D5NG-881M50-M11Z
FAR-D5PF-881M50-M3E7
FAR-D5NE-881M50-P1A9
FAR-D5NE-881M50-P1A6Q
FAR-D5PE-881M50-P3EZ
FAR-D5PE-881M50-P3EY
FAR-D5PF-911M50-M3J7
FAR-D5NH-942M50-M1Y9
FAR-D5NF-942M50-P1GZ
FAR-D5NF-942M50-P1GWQ
D5NE942M5P1G9
9 Pin, A Type
9 Pin, B Type Rx : Bal.100ohm
9 Pin, B Type 100ohm, New
9 Pin, B Type Rx : Bal.100ohm
9 Pin, A Type Rx : Bal.100ohm
9 Pin, A Type
CDMA/W-CDMA V（850）
J-CDMA（BW:27MHz）
W-CDMA VIII（900）
9 Pin, B Type
9 Pin, B Type 100ohm, STD
9 Pin, B Type 100ohm, GPS High Att.
9 Pin, B Type 100ohm
D5PE942M5P3GT
9 Pin, B Type 100ohm
FAR-D6NH-1G9600-M1Z9
FAR-D6NH-1G9600-M1Z6
D6HK1G960DK12
9 Pin, B Type
9 Pin, B Type Low Rx IL
9 Pin, B Type
PCS/W-CDMA II（1.9G）
FAR-D6NF-1G9600-P1BT
D6NF1G960P1BR
9 Pin, B Type 100ohm, Low Rx IL
9 Pin, B Type 100ohm High GPS Att. & Rx Isol.
9 Pin, B Type 100ohm, STD
9 Pin, B Type 100ohm High GPS Att. & Rx Isol.
9 Pin, B Type Rx : Bal.100ohm
9 Pin, B Type
D6HH1G960BH95
D6HH1G960BH97
FAR-D6JH-2G1325-B1YZ
D6JG2G132D3GZ
W-CDMA IV（DCS/2G）
LTE XIII（Upper C）
D6PE2G132P3DW
9 Pin, B Type Rx : Bal.100ohm
9 Pin, B Type Rx : Bal.100ohm
9 Pin, B Type
D5NE782M0P1D6
D5NG782M0M15Z
FAR-D5NE-740M00-P1C9
D5NG740M0M14Z
9 Pin, B Type Rx : Bal.100ohm
9 Pin, B Type
LTE XVII（Lower B,C）
CDMA BC0+BC10
D5NF878M0P1ET
9 Pin B Type Rx : Bal.100ohm
＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
sawfilter01_e-01
186
■ PART NUMBERS
●CDMA/GSM850
System
Package Size
（mm）
Insertion Loss
（dB）
Attenuation
（dB）
Part number
Remarks
FAR-F5KB-836M50-B4ER
FAR-F5KB-836M50-B4EG
F5QA836M5M2AB
1.4×1.0×0.5
1.4×1.0×0.5
1.1×0.9×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.1×0.9×0.5
1.4×1.0×0.5
1.1×0.9×0.5
1.4×1.0×0.5
1.1×0.9×0.5
1.7
1.6
1.6
1.9
1.5
1.5
1.4
1.5
1.7
1.6
1.7
1.3
44
42
34
44
61
61
64
56
56
46
53
63
100ohm input
200ohm input
－
High Att. type
100ohm output
100ohm, High Att.
200ohm output
100ohm, High Att.,Low Loss type
High Att. type
－
CDMA Tx
CDMA/GSM850 Tx
FAR-F5KA-836M50-D4DF
FAR-F5KB-881M50-B4ED
FAR-F5KY-881M50-B4UZ
FAR-F5KB-881M50-B4EJ
F5QG881M5P2KG
CDMA Rx
FAR-F5KA-881M50-D4DB
FAR-F5QA-881M50-M2AF
FAR-F5KB-881M50-B4EA
FAR-F5QB-881M50-P2BA
GSM850/CDMA Rx
GSM850 Rx
150ohm output
150ohm output
●EGSM
System
Package Size
（mm）
Insertion Loss
（dB）
Attenuation
（dB）
Part number
Remarks
FAR-F5KA-897M50-D4DC
FAR-F5QA-897M50-M2AC
FAR-F5KA-942M50-D4DD
F5QA942M5M2AG
1.4×1.0×0.5
1.1×0.9×0.5
1.4×1.0×0.5
1.1×0.9×0.5
1.4×1.0×0.5
1.1×0.9×0.5
1.1x0.9x0.5
2.2
2.3
2.0
2.2
1.6
1.6
2.2
16
18
34
40
26
28
56
High Att. type
－
High Att. type
EGSM Tx
－
EGSM Rx
FAR-F5KB-942M50-B4EB
FAR-F5QB-942M50-P2BB
FAR-F5QG-942M50-P2KB
150ohm output
150ohm output
100ohm, High Att.
●DCS
Package Size
（mm）
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.1×0.9×0.5
Insertion Loss
（dB）
2.5
2.1
1.5
1.6
Attenuation
（dB）
30
20
14
17
System
DCS Tx
Part number
Remarks
FAR-F6KA-1G7475-D4CY
FAR-F6KA-1G8425-D4CK
FAR-F6KB-1G8425-B4GA
FAR-F6QB-1G8425-P2BF
DCS Rx
150ohm output
150ohm output
●US-PCS/GSM1900
Package Size
（mm）
Insertion Loss
（dB）
Attenuation
（dB）
System
Part number
Remarks
FAR-F6KA-1G8800-L4AF
FAR-F6KB-1G8800-B4GS
F6KB1G880B4GH
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.1×0.9×0.5
2.4
2.3
2.4
3.4
3.4
2.1
2.6
2.8
2.0
1.8
1.6
1.5
35
28
42
44
43
23
50
50
18
18
18
15
Full band, High Att.
100ohm input
200ohm input
High Att.
US-PCS Tx
US-PCS Rx
FAR-F6KA-1G9600-D4DQ
FAR-F6KA-1G9600-D4MT
FAR-F6KB-1G9600-B4GP
FAR-F6KY-1G9600-B4UU
F6KY1G960B4NF
High Att./New
100ohm output
100ohm, High Att.
100ohm output
FAR-F6KA-1G9600-D4CR
F6KA1G960D4CZ
GSM1900/US-PCS Rx
GSM1900 Rx
Low loss type
150ohm output
150ohm output
FAR-F6KB-1G9600-B4GB
F6QB1G960P2BK
●GSM Dual
Package Size
（mm）
Insertion Loss
（dB）
Attenuation
（dB）
System
Part number
Remarks
FAR-G6KZ-1G8425-Y4WZ
G6QF1G842N2HA
1.8×1.4×0.5
1.5×1.1×0.5
1.8×1.4×0.5
1.5×1.1×0.5
1.5×1.1×0.5
1.8×1.4×0.5
1.5×1.1×0.5
1.8×1.4×0.5
1.5×1.1×0.5
1.5×1.1×0.5
1.8×1.4×0.5
1.5×1.1×0.5
1.8×1.4×0.5
1.5×1.1×0.5
1.5×1.1×0.5
1.8×1.4×0.5
1.5×1.1×0.5
1.5×1.1×0.5
1.8×1.4×0.5
1.5×1.1×0.5
1.8×1.4×0.5
1.5×1.1×0.5
1.8×1.4×0.5
1.5×1.1×0.5
1.8×1.4×0.5
1.5×1.1×0.5
1.8/1.6
1.6/1.6
1.6/1.8
1.6/1.6
1.5/1.8
1.9/2.2
1.9/2.2
1.8/1.4
1.7/1.4
1.7/2.3
2.2/1.9
2.5/2.0
2.3/1.8
2.4/1.9
1.9/1.7
1.9/1.6
1.7/1.7
1.6/1.2
1.9/1.8
1.9/1.8
1.9/1.8
1.9/1.8
2.5/2.5
2.5/2.5
1.6/1.5
1.6/1.4
31/16
31/17
16/31
17/31
50/29
50/25
48/26
31/54
29/51
52/37
25/52
25/55
35/40
32/37
17/13
14/16
15/16
13/15
13/18
15/18
13/18
15/18
20/12
18/13
15/58
14/54
EGSM 150ohm output DCS 150ohm output
EGSM 150ohm output DCS 150ohm output
DCS 150ohm output EGSM 150ohm output
DCS 150ohm output EGSM 150ohm output
GSM850 150ohm output EGSM 150ohm output
GSM850 150ohm output EGSM 150ohm output
GSM850 150ohm output EGSM 150ohm output
EGSM 150ohm output GSM850 150ohm output
EGSM 150ohm output GSM850 150ohm output
EGSM 50ohm output GSM850 50ohm output
EGSM 150ohm output GSM850 150ohm output
EGSM 150ohm output GSM850 150ohm output
EGSM 150ohm output GSM850 150ohm output
EGSM 150ohm output GSM850 150ohm output
DCS 150ohm output GSM1900 150ohm output
GSM1900 150ohm output DCS 150ohm output
GSM1900 150ohm output DCS 150ohm output
GSM1900 150ohm output DCS 150ohm output
GSM1900 150ohm output DCS 150ohm output
GSM1900 150ohm output DCS 150ohm output
GSM1900 150ohm output DCS 150ohm output
DCS 150ohm output GSM1900 150ohm output
GSM1900 150ohm output DCS 150ohm output
GSM1900 150ohm output DCS 150ohm output
GSM1900 150ohm output GSM850 150ohm output
GSM1900 150ohm output GSM850 150ohm output
EGSM＋DCS Rx
FAR-G6KZ-1G8425-Y4WY
G6QF1G842N2GC
DCS＋EGSM Rx
GSM850＋EGSM Rx
FAR-G5QC-942M50-N2FB
FAR-G5KT-942M50-Y4RW
FAR-G5QD-942M50-N2DZ
FAR-G5KC-942M50-Y4YW
FAR-G5QC-942M50-N2CD
G5QJ942M5M2MA
GSM850＋EGSM Rx
（Common Input）
EGSM＋GSM850 Rx
FAR-G5KT-942M50-Y4RZ
FAR-G5QD-942M50-N2DB
G5KW942M5Y4YF
EGSM＋GSM850 Rx
（Common Input）
EGSM＋GSM850 Rx
（Common Output）
G5QE942M5N2ED
DCS＋GSM1900 Rx
FAR-G6QC-1G9600-N2FA
FAR-G6KC-1G9600-Y4YY
FAR-G6QC-1G9600-N2CB
G6QC1G960N2CH
GSM1900＋DCS Rx
FAR-G6KT-1G9600-Y4RY
G6QD1G960N2DA
GSM1900＋DCS Rx
（Common Input）
G6KT1G960Y4RU
DCS+ GSM1900 Rx
(Common Input)
G6QD1G960N2DY
G6KW1G960Y4YE
GSM1900＋DCS Rx
（Common Output）
G6QE1G960N2EC
FAR-G6KG-1G9600-Y4ZF
FAR-G6QF-1G9600-N2GA
GSM1900＋850 Rx
＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
sawfilter01_e-01
187
■ PART NUMBERS
●GPS
Package Size
（mm）
Insertion Loss
（dB）
Attenuation
（dB）
System
Part number
Remarks
FAR-F6KA-1G5754-L4AA
FAR-F6KA-1G5754-L4AJ
FAR-F6KA-1G5754-L4AB
FAR-F6QA-1G5754-H2JC
F6QA1G575H2JD
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.1×0.9×0.5
1.1×0.9×0.5
1.1×0.9×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
0.9
－
－
－
－
－
－
－
－
－
－
－
Low loss type
Low loss, High Att.
Ultra Low loss type
High Att.
0.9
0.44
1.11
GPS
0.87
1.27
1.1
Low loss type
High Att.
F6QA1G575H2JE
FAR-F6KB-1G5754-B4GE
FAR-F6KB-1G5754-B4GU
F6KB1G575B4HQ
100ohm, Low loss
100ohm, High Att.
100ohm, High Att.
－
1.2
1.1
FAR-F6KA-1G5859-D4MS
FAR-F6KB-1G5859-B4HR
1.0（1.2）
1.（1 1.4）
GPS（GNSS）
100ohm output
●W-CDMA
Package Size
（mm）
Insertion Loss
（dB）
Attenuation
（dB）
System
Part number
Remarks
FAR-F6KA-1G9500-D4CD
FAR-F6KA-1G9500-D4DG
FAR-F6KB-1G9500-B4GJ
F6QA1G950M2AA
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.1×0.9×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.1×0.9×0.5
1.5x1.1x0.5
2.2
36
1.6
38
Low loss, High Att.
100ohm input
W-CDMA I（2G）Tx
2.1
34
1.8
38
Low loss, High Att.
FAR-F6KA-2G1400-D4CG
F6KA2G140D4DW
1.9
39
1.9
48
High Att.
W-CDMA I（2G）Rx
FAR-F6KB-2G1400-B4GC
FAR-F6KY-2G1400-B4UY
F6QG2G140P2KA
1.7
39
100ohm output
100ohm, High Att.
100ohm, High Att.
1.8
64
1.7
55
G6QL2G140M2PA
1.9/3.0
2.0/3.2
1.4
48/41
53/42
48
W-CDMA（I 2G）+I（I 1900）Rx
G6QH2G140N2LA
1.5x1.1x0.5
100ohm output
100ohm output
J-CDMA（2G/B.W.20MHz）Rx
W-CDMA IV（1.7G/2G）Tx
FAR-F6KB-2G1200-B4GQ
FAR-F6KA-1G7400-D4DE
FAR-F5KA-897M50-D4VW
F5KA897M5D4MH
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.5×1.1×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.8×1.4×0.5
1.8×1.4×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.5
44
2.6
38
High Att.
W-CDMA VIII（EGSM）Tx
1.6
20
Low Loss
F5KA942M5D4MYB
1.9
53
High Att.
W-CDMA VIII（EGSM）Rx
FAR-F5KB-942M50-B4ES
FAR-F5KY-942M50-B4UW
G5QH942M5N2LN
2.4
29
100ohm output
100ohm, High Att.
100ohm output
2.0
57
W-CDMA V (850)+ VIII(900) Rx
1.6/2.0
1.8
56/50
31
W-CDMA IX（1.7G）Tx
FAR-F6KA-1G7675-D4CT
FAR-F6KA-1G8625-D4DH
FAR-F6KB-1G8625-B4GT
FAR-G6KG-1G9500-Y4PG
1.8
40
W-CDMA IX（1.7G）Rx
2.1
40
100ohm output
W-CDMA V（850）＋ I（2G）Tx
1.9/2.4
1.6/1.5
1.5
42/43
42/64
55
V（850）200ohm in I（2G）200ohm in
I（2G）200ohm out V（850）200ohm out
W-CDMA I（2G）＋ V（850）Rx FAR-G6KG-2G1400-Y4SH
LTE XIII（Upper C）Tx
LTE XIII（Upper C）Rx
LTE XVII（Lower B,C）Tx
LTE XVII（Lower B,C）Rx
LTE XX
FAR-F5KA-782M00-D4VP
FAR-F5KY-751M00-B4UQ
FAR-F5KA-710M00-D4VQ
FAR-F5KY-740M00-B4UR
F5KA847M0D4ML
1.6
50
100ohm output
100ohm output
1.2
32
1.4
60
1.7
52
TD LTE XXXVIII Rx
TD LTE XL Rx
F6KB2G595B4HS
2.6
38
150ohm output
150ohm output
F6KB2G350B4HT
2.7
37
●Other
Package Size
（mm）
Insertion Loss
（dB）
1.8
Attenuation
（dB）
System
Part number
Remarks
High Att
ISM900（B.W.26MHz）
FAR-F5QA-915M00-M2AK
FAR-F6KA-2G0175-D4DR
FAR-F6KA-1G9000-D4DS
FAR-F6KA-1G9000-D4MZ
FAR-G6QJ-2G0175-M2MD
G6QJ2G017M2RD
1.1×0.9×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.5×1.1×0.5
1.5×1.1×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
－
－
－
－
－
－
－
－
40
47
35
36
40
1.8
TD-SCDMA
1.6
1.4
Low IL
TD-SCDMA（2G＋1.9G）
TD-SCDMA (1.9G+2G)
1.3/1.4
1.6/2.0
2.6
2 IN/2 OUT
1 IN/2 OUT
FAR-F6KA-2G4418-D4CU
FAR-F6KA-2G4418-A4VA
FAR-F6KA-2G4500-A4VD
F6KA2G436A4VE
＋10dBm
＋23dBm
Low IL,+19dBm
BW=72MHz,+24dBm
BW=100MHz,+24dBm , Low loss
BW=83.5MHz,+24dBm
BW=68MHz,+24dBm
3.0
1.9
Wireless LAN
2.5
F6KA2G450A4VF
1.9
F6KA2G441A4VG
2.4
F6KA2G466A4VJ
2.8
＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
sawfilter01_e-01
188
■ ELECTRICAL CHARACTERISTICS
FAR-D5NF-942M50-P1GWQ
Tx to Ant
Ant to Rx
Tx to Ant, Ant to Rx
Tx to Rx Isolation
0.0
0.0
0.0
－10.0
－20.0
－30.0
0.0
Mk1: 882.4MHz
Mk1: 925.0MHz
Mk1: 882.4MHz
Mk1: 882.4MHz
1
2
1
2
S21=
－
1.869dB
S32=
－
2.815dB
S21=
S32=
－
－
1.869dB
64.673dB
S31=
－
81.875dB
－10.0
－20.0
－30.0
－40.0
－1.0
－2.0
－3.0
－10.0
－20.0
－30.0
Mk2: 912.6MHz
Mk2: 960.0MHz
Mk2: 912.6MHz
S21=
－
1.895dB
S32=
－
2.348dB
Mk2: 912.6MHz
S31=
－
65.043dB
1
2
S21=
S32=
－
－
1.895dB
63.538dB
Mk3: 927.4MHz
Mk3: 882.4MHz
Mk3: 927.4MHz
4
S21=
－
61.812dB
S32=
－
64.673dB
S31=
－
67.022dB
3
Mk3: 925.0MHz
Mk4: 957.6MHz
40.0
Mk4: 912.6MHz
4.0
Mk4: 957.6MHz
－
－
－
40.0
S21=
S32=
－
－
68.590dB
2.815dB
S21=
－
54.141dB
S32=
－
63.538dB
S31=
－
54.321dB
－50.0
－60.0
－70.0
－50.0
－60.0
－70.0
－5.0
－6.0
－7.0
－50.0
－60.0
－70.0
Mk4: 960.0MHz
4
4
S21=
S32=
－
－
54.051dB
2.348dB
3
4
3
2
3
－80.0
－90.0
－80.0
－90.0
－8.0
－9.0
－80.0
－90.0
1
－100.0
－100.0
－10.0
－100.0
820 840 860 860 900 920 940 960 980 1000 1020
Frequency[MHz]
820 840 860 860 900 920 940 960 980 1000 1020
Frequency[MHz]
870 880 890 900 910 920 930 940 950 960 970
Frequency[MHz]
820 840 860 860 900 920 940 960 980 1000 1020
Frequency[MHz]
Pass-band（Tx to Ant）
Pass-band（Ant to Rx）
In-band Characteristic
Tx to Rx Isolation
＊
These date include loss that comes from the test board.（Approximately 0.05dB）
Tx to Ant (Wide span)
0.0
Ant to Rx (Wide span)
0.0
Mk1: 897.5MHz
Mk1: 942.5MHz
1
1
S21=
－
1.482dB
S32=
－
1.916dB
－10.0
－10.0
Mk2: 1575.0MHz
Mk2: 1045.0MHz
－20.0
－30.0
－40.0
－20.0
－30.0
S21=
－
48.665dB
S32=
－
56.269dB
Mk3: 1830.0MHz
S21=
Mk3: 1750.0MHz
S32=
－
52.034dB
－
60.796dB
Mk4: 2500.0MHz
S21=
40.0
Mk4: 4810.0MHz
S32=
－
5
4
－
39.380dB
－
34.991dB
4
－50.0
－60.0
－70.0
－50.0
－60.0
－70.0
Mk5: 2745.0MHz
S21=
2
－
37.117dB
3
2
3
－80.0
－90.0
－80.0
－90.0
－100.0
－100.0
0
600 1200 1800 2400 3000 3600 4200 4800 5400 6000
Frequency[MHz]
0
600 1200 1800 2400 3000 3600 4200 4800 5400 6000
Frequency[MHz]
Wide-band（Tx to Ant）
Wide-band（Ant to Rx）
FAR-F6KY-2G1400-B4UY
0.0
－10.0
－20.0
－30.0
－40.0
0.0
－1.0
－2.0
－3.0
11.0
11.0
10.0
9.0
Mk1: 2110.0MHz
Mk1: 2110.0MHz
Mk1: 2110.0MHz
VSWR1= 1.542
Mk1: 2110.0MHz
VSWR2= 1.564
1
2
S21=
－
1.624dB
S21=
－
1.624dB
10.0
9.0
Mk2: 2170.0MHz
Mk2: 2170.0MHz
Mk2: 2170.0MHz
VSWR1= 1.551
Mk2: 2170.0MHz
VSWR2= 1.525
S21=
－
1.615dB
S21=
－
1.615dB
1
2
Mk3: 1920.0MHz
8.0
8.0
S21=
－
67.953dB
Mk4: 1980.0MHz
4.0
7.0
7.0
－
S21=
－
73.634dB
－50.0
－60.0
－70.0
－5.0
－6.0
－7.0
6.0
5.0
4.0
6.0
5.0
4.0
Mk5: 2200.0MHz
S21=
－
51.021dB
5
3
4
－80.0
－90.0
－8.0
－9.0
3.0
2.0
3.0
2.0
－100.0
－10.0
1.0
1.0
1
2
1
2
1840 1900 1960 2020 2080 2140 2200 2260 2320 2380 2440
Frequency[MHz]
2080 2092 2104 2116 2128 2140 2152 2164 2176 2188 2200
Frequency[MHz]
2080 2092 2104 2116 2128 2140 2152 2164 2176 2188 2200
Frequency[MHz]
2080 2092 2104 2116 2128 2140 2152 2164 2176 2188 2200
Frequency[MHz]
Pass-band Characteristic
In-band Characteristic
VSWR（INPUT）
VSWR（OUTPUT）
0.0
Mk1: 2140.0MHz
1
S21=
－
1.303dB
－10.0
－20.0
－30.0
－40.0
Mk2: 925.0MHz
S21=
－
61.972dB
Mk3: 1950.0MHz
S21=
－
69.270dB
Mk4: 2500.0MHz
S21=
－
54.864dB
－50.0
－60.0
－70.0
Mk5: 6000.0MHz
5
S21=
－
45.717dB
4
2
3
－80.0
－90.0
－100.0
0
600 1200 1800 2400 3000 3600 4200 4800 5400 6000
Frequency[MHz]
Wide-band Characteristic
＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
sawfilter01_e-01
189
■ PACKAGING
①Minimum Quantity
④Reel size
Size
Type
Code&Quantit（y Pieces）
（mm）
3.0×2.5
Duplexer 2.5×2.0
2.0×1.6
Z
Z
Z
Z
Z
3000
3000
3000
3000
3000
U
U
10000
10000
Y
Y
Y
Y
Y
Y
Y
15000
15000
15000
15000
15000
15000
15000
2.0×1.6
C
B
A
Single
1.4×1.0
Filter
1.1×0.9
2.0×1.6
J
J
5000
5000
Z
Z
3000
3000
Dual
1.8×1.4
Filter
1.5×1.1
W1
W2
②Tape material
◦Material of Reel
4.0＋/－0.1
Material : Polystyrene＋Carbon
2.00＋/－0.05
Characteristics : Conform to EIAJ-ET-7200A
Color : Black
ｆ
component fixed area
Surface resistance（reference value）:109Ω/sq Max.
Blank portions
Blank portions
ｄ
a
c
Code Quantity
A
B
C
W1
W2
Z
J
3,000 pcs
5,000 pcs
10,000 pcs
15,000 pcs
φ180.0 +0.0 / －1.5
φ180.0 +0.0 / －1.5
φ330.0 ±2.0
φ330.0 ±2.0
φ66.0 ±0.5
φ66.0 ±0.5
φ100.0 ±1.0
φ100.0 ±1.0
φ13.0 ±0.2
φ13.0 ±0.2
φ13.0 ±0.2
φ13.0 ±0.2
9.0 +1.0 / －0.0
9.0 +1.0 / －0.0
9.4 ±1.0
11.4 ±1.0
11.4 ±1.0
13.4 ±1.0
13.4 ±1.0
ｂ
400mm or more
（15.7inch or more）
e
4.0＋/－0.1
Uni：t mm
U
Y
240mm min
9.4 ±1.0
Direction of tape feed
Unit：mm
◦Taping dimensions
Size
Type
⑤Reel label and Reel C-Label sticking and Winding method
a
b
c
d
e
f
（mm）
3.0×2.5
2.5×2.0
2.0×1.6
2.0×1.6
1.4×1.0
1.1×0.9
2.0×1.6
1.8×1.4
1.5×1.1
3.4±0.1
2.8±0.1
2.4±0.1
2.4±0.1
1.7±0.1
1.3±0.1
2.4±0.1
2.2±0.1
1.8±0.1
2.85±0.1
2.3±0.1
2.0±0.1
2.0±0.1
1.3±0.1
1.1±0.1
2.0
1.05±0.05
1.5+0.1/－0
1.05±0.05
1.05±0.05
0.5±0.05
0.5±0.05
1.05±0.05
0.5±0.05
0.5±0.05
1.55±0.05
1.5+0.1/－0 1.0+0.1/－0.0 0.25±0.05
1.5+0.1/－0 0.90 － 0.05
1.5+0.1/－0 0.90 － 0.05
1.5+0.1/－0
1.55±0.05
1.5+0.1/－0 0.90 － 0.05
1.55±0.05
1.5+0.1/－0
1.0±0.1
0.25±0.05
◦Surface
Duplexer
0.25±0.05
0.25±0.05
0.20±0.05
0.20±0.05
0.25±0.05
0.30±0.05
0.25±0.05
Reel Label
Single
Filter
0.63±0.05
0.63±0.05
Dual Filter
1.8
0.8±0.1
0.7±0.1
1.4
Unit：mm
Reel C-Label
◦Material of Tape（Conductive）
Tape : Polystyrene
Top cover tape : Polyethylene terephthalate（PET）and Polyethylene
Reel side
③Top Tape Strength
The top tape requires a peel-off force of 0.1 to 1.0N in the direction of the arrow
as illustrated below.
Top cover tape
Leading Edge
INDEX
0～15°
Tape
＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
sawfil_reli_e-01
sawfil_reli-PRP1
■ RELIABILITY DATA
Filter
1. Terminal stregth
Specifications
Conditions
No damage to be found.
Bending Test.
according to IEC60068-2-21(JISC60068-2-21)
Ｒ340
Board
1.6±0.20
Solder
Device
45±2
45±2
2. Mechanical shock
Specifications
Conditions
After testing, meet the specified characteristics at a room temperature.
Apply 14700m/s2 for 0.5ms 5 times for each of 6 directions.
according to IEC68-2-27(JISC60068-2-27).
3. Vibration
Specifications
Conditions
After testing, meet the specified characteristics at a room temperature.
With 1.5 mm of whole amplitude at 10 to 55 Hz of frequency, and 98m/s2 of acceleration at 55 to 500Hz, apply a
vibration for 2 hours for each of 3 directions, period is 15 minutes(10 to 500 to 10Hz)
4. Drop 1
Specifications
Conditions
After testing, meet the specified characteristics at a room temperature.
Drop 3 times onto concrete floor from the height of 1.0m.
5. Drop 2
Specifications
Conditions
After testing, meet the specified characteristics at a room temperature.
Drop with 150g weight 3 times in each 6 direction onto concrete floor from the height of 1.8m.
6. Temperature cycling
Specifications
After testing, meet the specified characteristics at a room temperature.
Conditions
Temp. range －40 to ＋100℃. 500cycle.
７. Static humidity
Specifications
Conditions
After testing, meet the specified characteristics at a room temperature.
＋85℃, 90% to 95%RH, apply DC5V, 1000hours.
8. High temperature storage life
Specifications
After testing, meet the specified characteristics at a room temperature.
Conditions
＋100℃, 1000hours.
9. Low temperature storage life
Specifications
After testing, meet the specified characteristics at a room temperature.
Conditions
－40℃, 1000hours.
10. Solderbility 1
Specifications
Conditions
More than 90% of area of terminals to be covered with the solder.
A change of the remarkable appearance do not have it.
Lead-free Solder paste, Reflow；Peak temperature 245℃
11. Solderbility 2
Specifications
Conditions
More than 90% of area of terminals to be covered with the solder.
A change of the remarkable appearance do not have it.
Sn-Pb Solder paste, Reflow；Peak temperature 235℃
12. Solder heat resistance
Specifications
After testing, meet the specified characteristics at a room temperature.
A change of the remarkable appearance do not have it.
Conditions
Temperature profile of reflow soldering is as follows (Figure).
◆Recommended temperature profile of reflow soldering
ꢁFigure shows recommended temperature profile of reflow soldering in the case of lead-free solder alloy Sn3.0Ag0.5Cu.
ꢁSuitable condition for solder heating is differed depending on composition and manufacturing method.
ꢁPlease contact to solder manufacturer for the details.
30～50sec.
Temperature（℃）
Ambient temperature
rise slope
: 1~4℃/sec.
Temperature in heat condition
: 230℃min. 50sec. max.
300
Temperature of upper surface of package
and PCB surface.
250
Pre-Heating
150~180℃
: 260℃min. 10sec. max.
200
150
100
Ambient temperature
cool slope
: 1~4℃/sec.
50
50~110sec.
10sec.
＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
sawfil_reli_e-01
sawfil_reli-PRP2
■ RELIABILITY DATA
Duplexer
1. Terminal stregth
Specifications
Conditions
No damage to be found.
Bend width 4mm, hold for 5＋/－1 sec.
according to IEC60068-2-21(JISC60068-2-21)
Ｒ340
Board
1.6±0.20
Solder
Device
45±2
45±2
2. Mechanical shock
Specifications
Conditions
After testing, meet the specified characteristics at a room temperature.
Apply 14700m/s2 for 0.5ms 5 times for each of 6 directions.
according to IEC68-2-27(JISC60068-2-27).
3. Vibration
Specifications
Conditions
After testing, meet the specified characteristics at a room temperature.
With 1.5 mm of whole amplitude at 10 to 55 Hz of frequency, and 98m/s2 of acceleration at 55 to 500Hz, apply a
vibration for 2 hours for each of 3 directions, period is 15 minutes(10 to 500 to 10Hz)
4. Drop 1
Specifications
Conditions
After testing, meet the specified characteristics at a room temperature.
Drop 3 times onto concrete floor from the height of 1.0m.
5. Drop 2
Specifications
Conditions
After testing, meet the specified characteristics at a room temperature.
Drop with 150g weight 3 times in each 6 direction onto concrete floor from the height of 1.8m.
6. Temperature cycling
Specifications
After testing, meet the specified characteristics at a room temperature.
Conditions
Temp. range －40 to ＋100℃. 500cycle.
７. Static humidity
Specifications
Conditions
After testing, meet the specified characteristics at a room temperature.
＋85℃, 90% to 95%RH, apply DC5V, 1000hours.
8. High temperature storage life
Specifications
After testing, meet the specified characteristics at a room temperature.
Conditions
＋100℃, 1000hours.
9. Low temperature storage life
Specifications
After testing, meet the specified characteristics at a room temperature.
Conditions
－40℃, 1000hours.
10. High Temperature Bias
Specifications
After testing, meet the specified characteristics at a room temperature.
Conditions
＋50℃, ＋29dBm, 50000hours.
11. Solderbility 1
Specifications
Conditions
More than 90% of area of terminals to be covered with the solder.
A change of the remarkable appearance do not have it.
Lead-free Solder paste, Reflow；Peak temperature 245℃
12. Solderbility 2
Specifications
Conditions
More than 90% of area of terminals to be covered with the solder.
A change of the remarkable appearance do not have it.
Sn-Pb Solder paste, Reflow；Peak temperature 235℃
13. Solder heat resistance
Specifications
After testing, meet the specified characteristics at a room temperature.
A change of the remarkable appearance do not have it.
Conditions
Temperature profile of reflow soldering is as follows (Figure).
◆Recommended temperature profile of reflow soldering
ꢁFigure shows recommended temperature profile of reflow soldering in the case of lead-free solder alloy Sn3.0Ag0.5Cu.
ꢁSuitable condition for solder heating is differed depending on composition and manufacturing method.
ꢁPlease contact to solder manufacturer for the details.
30～50sec.
Temperature（℃）
Ambient temperature
rise slope
: 1~4℃/sec.
Temperature in heat condition
: 230℃min. 50sec. max.
300
Temperature of upper surface of package
and PCB surface.
250
Pre-Heating
150~180℃
: 260℃min. 10sec. max.
200
150
100
Ambient temperature
cool slope
: 1~4℃/sec.
50
50~110sec.
10sec.
＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
sawfil_reli_e-01
sawfil_reli-PRP3
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明